Battery groups › 151R

BCI battery group

Group 151R battery size

A BCI group 151R battery is at most 188 mm long, 125 mm wide and 225 mm tall (7.4 × 4.92 × 8.86 in), according to the Battery Council International group chart.

Group 151R188 × 125 × 225 mm
Group 151R188 × 125 mmGroup 402R198 × 132 mm
BCI group 151R maximum footprint (length × width) to scale, next to group 402R. Source: BCI group size chart.
Maximum size188 × 125 × 225 mm
In inches7.4 × 4.92 × 8.86
Terminal typesA
PolarityReversed (R): positive terminal on the opposite side from the base group
Cold cranking amps (OE range)340–370 A
JIS equivalents28B19L and 44B19L (BCI best fit)

Cars whose manuals point to group 151R

None of the owner's manuals this site has read so far print group 151R. Most Japanese and Korean makers print a case size or capacity instead of a BCI group, so the battery label on the car is the better guide.

Measuring for a group 151R

To take a group 151R, the tray needs at least 188 mm (7.4 in) of length and 125 mm (4.92 in) of width inside the hold-down, and 225 mm (8.86 in) of height below the hood or any bracket, with room left for the cable ends. These are BCI maximums: a real group 151R battery can be a few millimetres smaller, never larger. Original-equipment batteries in this group were rated from 340 to 370 cold cranking amps, so the right rating depends on the car; match or exceed the rating on the battery you are replacing.

Nearby sizes

GroupL × W × H (mm)Difference from 151R
52186 × 147 × 210-2 mm length, +22 mm width, -15 mm height
61192 × 162 × 225+4 mm length, +37 mm width, 0 mm height
54186 × 154 × 212-2 mm length, +29 mm width, -13 mm height
402R198 × 132 × 188+10 mm length, +7 mm width, -37 mm height
51238 × 129 × 223+50 mm length, +4 mm width, -2 mm height

Positive numbers mean the other group is bigger than group 151R. A bigger case only fits if your tray and hold-down have that much spare room; measure inside the hold-down frame, not the old battery.

Fitting a group 151R

The group sets the case size, terminal position and hold-down. A battery from another group can only replace it when the length, width and height all fit the tray and the terminals land on the same sides. No other passenger-car group in the BCI chart has exactly the same case size and polarity. Use the tray fit checker to list every group that fits a measured space.

Source: Battery Council International, BCI Group Sizes (Oct 2023 PDF), page 7. Checked 2026-10-20.