Battery groups › 21R

BCI battery group

Group 21R battery size

A BCI group 21R battery is at most 208 mm long, 173 mm wide and 222 mm tall (8.19 × 6.81 × 8.74 in), according to the Battery Council International group chart.

Group 21R208 × 173 × 222 mm
Group 21R208 × 173 mmGroup 21208 × 173 mmGroup 25230 × 175 mm
BCI group 21R maximum footprint (length × width) to scale, next to group 21 and group 25. Source: BCI group size chart.
Maximum size208 × 173 × 222 mm
In inches8.19 × 6.81 × 8.74
Terminal typesA and A2
PolarityReversed (R): positive terminal on the opposite side from the base group
Cold cranking amps (OE range)310–490 A
JIS equivalents50D20L (BCI best fit)

Cars whose manuals point to group 21R

None of the owner's manuals this site has read so far print group 21R. Most Japanese and Korean makers print a case size or capacity instead of a BCI group, so the battery label on the car is the better guide.

Measuring for a group 21R

To take a group 21R, the tray needs at least 208 mm (8.19 in) of length and 173 mm (6.81 in) of width inside the hold-down, and 222 mm (8.74 in) of height below the hood or any bracket, with room left for the cable ends. These are BCI maximums: a real group 21R battery can be a few millimetres smaller, never larger. Original-equipment batteries in this group were rated from 310 to 490 cold cranking amps, so the right rating depends on the car; match or exceed the rating on the battery you are replacing.

Nearby sizes

GroupL × W × H (mm)Difference from 21R
21208 × 173 × 2220 mm length, 0 mm width, 0 mm height
121R208 × 177 × 2150 mm length, +4 mm width, -7 mm height
71208 × 179 × 2160 mm length, +6 mm width, -6 mm height
26208 × 173 × 1970 mm length, 0 mm width, -25 mm height
26R208 × 173 × 1970 mm length, 0 mm width, -25 mm height

Positive numbers mean the other group is bigger than group 21R. A bigger case only fits if your tray and hold-down have that much spare room; measure inside the hold-down frame, not the old battery.

Fitting a group 21R

The group sets the case size, terminal position and hold-down. A battery from another group can only replace it when the length, width and height all fit the tray and the terminals land on the same sides. No other passenger-car group in the BCI chart has exactly the same case size and polarity. Use the tray fit checker to list every group that fits a measured space.

Source: Battery Council International, BCI Group Sizes (Oct 2023 PDF), page 6. Checked 2026-10-20.