Battery groups › 27

BCI battery group

Group 27 battery size

A BCI group 27 battery is at most 306 mm long, 173 mm wide and 225 mm tall (12.05 × 6.81 × 8.86 in), according to the Battery Council International group chart.

Group 27306 × 173 × 225 mm
Group 27306 × 173 mmGroup 27F318 × 173 mmGroup 27H298 × 173 mm
BCI group 27 maximum footprint (length × width) to scale, next to group 27F and group 27H. Source: BCI group size chart.
Maximum size306 × 173 × 225 mm
In inches12.05 × 6.81 × 8.86
Terminal typesA and A2
PolarityStandard layout for this group
Cold cranking amps (OE range)240–810 A
JIS equivalents65D31R, 75D31R, 95D31R, 105D31R and 115D31R (BCI best fit)

Cars whose manuals point to group 27

None of the owner's manuals this site has read so far print group 27. Most Japanese and Korean makers print a case size or capacity instead of a BCI group, so the battery label on the car is the better guide.

Measuring for a group 27

To take a group 27, the tray needs at least 306 mm (12.05 in) of length and 173 mm (6.81 in) of width inside the hold-down, and 225 mm (8.86 in) of height below the hood or any bracket, with room left for the cable ends. These are BCI maximums: a real group 27 battery can be a few millimetres smaller, never larger. Original-equipment batteries in this group were rated from 240 to 810 cold cranking amps, so the right rating depends on the car; match or exceed the rating on the battery you are replacing.

Nearby sizes

GroupL × W × H (mm)Difference from 27
27R306 × 173 × 2250 mm length, 0 mm width, 0 mm height
27F318 × 173 × 227+12 mm length, 0 mm width, +2 mm height
77306 × 184 × 2220 mm length, +11 mm width, -3 mm height
27H298 × 173 × 235-8 mm length, 0 mm width, +10 mm height
64296 × 162 × 225-10 mm length, -11 mm width, 0 mm height

Positive numbers mean the other group is bigger than group 27. A bigger case only fits if your tray and hold-down have that much spare room; measure inside the hold-down frame, not the old battery.

Fitting a group 27

The group sets the case size, terminal position and hold-down. A battery from another group can only replace it when the length, width and height all fit the tray and the terminals land on the same sides. No other passenger-car group in the BCI chart has exactly the same case size and polarity. Use the tray fit checker to list every group that fits a measured space.

Source: Battery Council International, BCI Group Sizes (Oct 2023 PDF), page 6. Checked 2026-10-20.