Battery groups › 58R

BCI battery group

Group 58R battery size

A BCI group 58R battery is at most 255 mm long, 183 mm wide and 177 mm tall (10.04 × 7.2 × 6.97 in), according to the Battery Council International group chart.

Group 58R255 × 183 × 177 mm
Group 58R255 × 183 mmGroup 22F241 × 175 mmGroup 22HF241 × 175 mm
BCI group 58R maximum footprint (length × width) to scale, next to group 22F and group 22HF. Source: BCI group size chart.
Maximum size255 × 183 × 177 mm
In inches10.04 × 7.2 × 6.97
Terminal typesA
PolarityReversed (R): positive terminal on the opposite side from the base group
Cold cranking amps (OE range)540–580 A

Cars whose manuals point to group 58R

None of the owner's manuals this site has read so far print group 58R. Most Japanese and Korean makers print a case size or capacity instead of a BCI group, so the battery label on the car is the better guide.

Measuring for a group 58R

To take a group 58R, the tray needs at least 255 mm (10.04 in) of length and 183 mm (7.2 in) of width inside the hold-down, and 177 mm (6.97 in) of height below the hood or any bracket, with room left for the cable ends. These are BCI maximums: a real group 58R battery can be a few millimetres smaller, never larger. Original-equipment batteries in this group were rated from 540 to 580 cold cranking amps, so the right rating depends on the car; match or exceed the rating on the battery you are replacing.

Nearby sizes

GroupL × W × H (mm)Difference from 58R
58255 × 183 × 1770 mm length, 0 mm width, 0 mm height
101260 × 179 × 170+5 mm length, -4 mm width, -7 mm height
78260 × 180 × 186+5 mm length, -3 mm width, +9 mm height
100260 × 179 × 188+5 mm length, -4 mm width, +11 mm height
42242 × 175 × 175-13 mm length, -8 mm width, -2 mm height

Positive numbers mean the other group is bigger than group 58R. A bigger case only fits if your tray and hold-down have that much spare room; measure inside the hold-down frame, not the old battery.

Fitting a group 58R

The group sets the case size, terminal position and hold-down. A battery from another group can only replace it when the length, width and height all fit the tray and the terminals land on the same sides. No other passenger-car group in the BCI chart has exactly the same case size and polarity. Use the tray fit checker to list every group that fits a measured space.

Source: Battery Council International, BCI Group Sizes (Oct 2023 PDF), page 6. Checked 2026-10-20.