Battery groups › 96R

BCI battery group

Group 96R battery size

A BCI group 96R battery is at most 242 mm long, 175 mm wide and 175 mm tall (9.53 × 6.89 × 6.89 in), according to the Battery Council International group chart.

Group 96R242 × 175 × 175 mm
Group 96R242 × 175 mmGroup 22F241 × 175 mmGroup 22HF241 × 175 mm
BCI group 96R maximum footprint (length × width) to scale, next to group 22F and group 22HF. Source: BCI group size chart.
Maximum size242 × 175 × 175 mm
In inches9.53 × 6.89 × 6.89
Terminal typesA and A1
PolarityReversed (R): positive terminal on the opposite side from the base group
Cold cranking amps (OE range)400–590 A

Cars whose manuals point to group 96R

Measuring for a group 96R

To take a group 96R, the tray needs at least 242 mm (9.53 in) of length and 175 mm (6.89 in) of width inside the hold-down, and 175 mm (6.89 in) of height below the hood or any bracket, with room left for the cable ends. These are BCI maximums: a real group 96R battery can be a few millimetres smaller, never larger. Original-equipment batteries in this group were rated from 400 to 590 cold cranking amps, so the right rating depends on the car; match or exceed the rating on the battery you are replacing.

Nearby sizes

GroupL × W × H (mm)Difference from 96R
42242 × 175 × 1750 mm length, 0 mm width, 0 mm height
90242 × 175 × 1750 mm length, 0 mm width, 0 mm height
67R231 × 175 × 176-11 mm length, 0 mm width, +1 mm height
47242 × 175 × 1900 mm length, 0 mm width, +15 mm height
58255 × 183 × 177+13 mm length, +8 mm width, +2 mm height

Positive numbers mean the other group is bigger than group 96R. A bigger case only fits if your tray and hold-down have that much spare room; measure inside the hold-down frame, not the old battery.

Fitting a group 96R

The group sets the case size, terminal position and hold-down. A battery from another group can only replace it when the length, width and height all fit the tray and the terminals land on the same sides. No other passenger-car group in the BCI chart has exactly the same case size and polarity. Use the tray fit checker to list every group that fits a measured space.

Source: Battery Council International, BCI Group Sizes (Oct 2023 PDF), page 7. Checked 2026-10-20.