Battery groups › 90

BCI battery group

Group 90 battery size

A BCI group 90 battery is at most 242 mm long, 175 mm wide and 175 mm tall (9.53 × 6.89 × 6.89 in), according to the Battery Council International group chart.

Group 90242 × 175 × 175 mm
Group 90242 × 175 mmGroup 22F241 × 175 mmGroup 22HF241 × 175 mm
BCI group 90 maximum footprint (length × width) to scale, next to group 22F and group 22HF. Source: BCI group size chart.
Maximum size242 × 175 × 175 mm
In inches9.53 × 6.89 × 6.89
Terminal typesA1 and A2
PolarityStandard layout for this group
Cold cranking amps (OE range)450–600 A
DIN / EN equivalentT5 / LBN2 (BCI best fit)

Cars whose manuals point to group 90

None of the owner's manuals this site has read so far print group 90. Most Japanese and Korean makers print a case size or capacity instead of a BCI group, so the battery label on the car is the better guide.

Measuring for a group 90

To take a group 90, the tray needs at least 242 mm (9.53 in) of length and 175 mm (6.89 in) of width inside the hold-down, and 175 mm (6.89 in) of height below the hood or any bracket, with room left for the cable ends. These are BCI maximums: a real group 90 battery can be a few millimetres smaller, never larger. Original-equipment batteries in this group were rated from 450 to 600 cold cranking amps, so the right rating depends on the car; match or exceed the rating on the battery you are replacing.

Nearby sizes

GroupL × W × H (mm)Difference from 90
42242 × 175 × 1750 mm length, 0 mm width, 0 mm height
96R242 × 175 × 1750 mm length, 0 mm width, 0 mm height
67R231 × 175 × 176-11 mm length, 0 mm width, +1 mm height
47242 × 175 × 1900 mm length, 0 mm width, +15 mm height
58255 × 183 × 177+13 mm length, +8 mm width, +2 mm height

Positive numbers mean the other group is bigger than group 90. A bigger case only fits if your tray and hold-down have that much spare room; measure inside the hold-down frame, not the old battery.

Fitting a group 90

The group sets the case size, terminal position and hold-down. A battery from another group can only replace it when the length, width and height all fit the tray and the terminals land on the same sides. Groups with exactly the same case size and polarity: 42. Use the tray fit checker to list every group that fits a measured space.

Source: Battery Council International, BCI Group Sizes (Oct 2023 PDF), page 7. Checked 2026-10-20.