Battery groups › 40R

BCI battery group

Group 40R battery size

A BCI group 40R battery is at most 278 mm long, 175 mm wide and 175 mm tall (10.94 × 6.89 × 6.89 in), according to the Battery Council International group chart.

Group 40R278 × 175 × 175 mm
Group 40R278 × 175 mmGroup 24260 × 173 mmGroup 24F273 × 173 mm
BCI group 40R maximum footprint (length × width) to scale, next to group 24 and group 24F. Source: BCI group size chart.
Maximum size278 × 175 × 175 mm
In inches10.94 × 6.89 × 6.89
Terminal typesA and A1
PolarityReversed (R): positive terminal on the opposite side from the base group
Cold cranking amps (OE range)550–650 A
DIN / EN equivalentT6 / LBN3 (BCI best fit)

Cars whose manuals point to group 40R

None of the owner's manuals this site has read so far print group 40R. Most Japanese and Korean makers print a case size or capacity instead of a BCI group, so the battery label on the car is the better guide.

Measuring for a group 40R

To take a group 40R, the tray needs at least 278 mm (10.94 in) of length and 175 mm (6.89 in) of width inside the hold-down, and 175 mm (6.89 in) of height below the hood or any bracket, with room left for the cable ends. These are BCI maximums: a real group 40R battery can be a few millimetres smaller, never larger. Original-equipment batteries in this group were rated from 550 to 650 cold cranking amps, so the right rating depends on the car; match or exceed the rating on the battery you are replacing.

Nearby sizes

GroupL × W × H (mm)Difference from 40R
91278 × 175 × 1750 mm length, 0 mm width, 0 mm height
41293 × 175 × 175+15 mm length, 0 mm width, 0 mm height
48278 × 175 × 1900 mm length, 0 mm width, +15 mm height
148278 × 175 × 1900 mm length, 0 mm width, +15 mm height
98R283 × 175 × 190+5 mm length, 0 mm width, +15 mm height

Positive numbers mean the other group is bigger than group 40R. A bigger case only fits if your tray and hold-down have that much spare room; measure inside the hold-down frame, not the old battery.

Fitting a group 40R

The group sets the case size, terminal position and hold-down. A battery from another group can only replace it when the length, width and height all fit the tray and the terminals land on the same sides. No other passenger-car group in the BCI chart has exactly the same case size and polarity. Use the tray fit checker to list every group that fits a measured space.

Source: Battery Council International, BCI Group Sizes (Oct 2023 PDF), page 6. Checked 2026-10-20.