Battery groups › 41

BCI battery group

Group 41 battery size

A BCI group 41 battery is at most 293 mm long, 175 mm wide and 175 mm tall (11.54 × 6.89 × 6.89 in), according to the Battery Council International group chart.

Group 41293 × 175 × 175 mm
Group 41293 × 175 mmGroup 24F273 × 173 mmGroup 27306 × 173 mm
BCI group 41 maximum footprint (length × width) to scale, next to group 24F and group 27. Source: BCI group size chart.
Maximum size293 × 175 × 175 mm
In inches11.54 × 6.89 × 6.89
Terminal typesA and A1
PolarityStandard layout for this group
Cold cranking amps (OE range)300–720 A
DIN / EN equivalentT65 (BCI best fit)

Cars whose manuals point to group 41

None of the owner's manuals this site has read so far print group 41. Most Japanese and Korean makers print a case size or capacity instead of a BCI group, so the battery label on the car is the better guide.

Measuring for a group 41

To take a group 41, the tray needs at least 293 mm (11.54 in) of length and 175 mm (6.89 in) of width inside the hold-down, and 175 mm (6.89 in) of height below the hood or any bracket, with room left for the cable ends. These are BCI maximums: a real group 41 battery can be a few millimetres smaller, never larger. Original-equipment batteries in this group were rated from 300 to 720 cold cranking amps, so the right rating depends on the car; match or exceed the rating on the battery you are replacing.

Nearby sizes

GroupL × W × H (mm)Difference from 41
40R278 × 175 × 175-15 mm length, 0 mm width, 0 mm height
91278 × 175 × 175-15 mm length, 0 mm width, 0 mm height
92315 × 175 × 175+22 mm length, 0 mm width, 0 mm height
98R283 × 175 × 190-10 mm length, 0 mm width, +15 mm height
48278 × 175 × 190-15 mm length, 0 mm width, +15 mm height

Positive numbers mean the other group is bigger than group 41. A bigger case only fits if your tray and hold-down have that much spare room; measure inside the hold-down frame, not the old battery.

Fitting a group 41

The group sets the case size, terminal position and hold-down. A battery from another group can only replace it when the length, width and height all fit the tray and the terminals land on the same sides. No other passenger-car group in the BCI chart has exactly the same case size and polarity. Use the tray fit checker to list every group that fits a measured space.

Source: Battery Council International, BCI Group Sizes (Oct 2023 PDF), page 6. Checked 2026-10-20.