Battery groups › 92

BCI battery group

Group 92 battery size

A BCI group 92 battery is at most 315 mm long, 175 mm wide and 175 mm tall (12.4 × 6.89 × 6.89 in), according to the Battery Council International group chart.

Group 92315 × 175 × 175 mm
Group 92315 × 175 mmGroup 27306 × 173 mmGroup 27F318 × 173 mm
BCI group 92 maximum footprint (length × width) to scale, next to group 27 and group 27F. Source: BCI group size chart.
Maximum size315 × 175 × 175 mm
In inches12.4 × 6.89 × 6.89
Terminal typesA1 and A2
PolarityStandard layout for this group
Cold cranking amps (OE range)575–720 A
DIN / EN equivalentT7 / LBN4 (BCI best fit)

Cars whose manuals point to group 92

None of the owner's manuals this site has read so far print group 92. Most Japanese and Korean makers print a case size or capacity instead of a BCI group, so the battery label on the car is the better guide.

Measuring for a group 92

To take a group 92, the tray needs at least 315 mm (12.4 in) of length and 175 mm (6.89 in) of width inside the hold-down, and 175 mm (6.89 in) of height below the hood or any bracket, with room left for the cable ends. These are BCI maximums: a real group 92 battery can be a few millimetres smaller, never larger. Original-equipment batteries in this group were rated from 575 to 720 cold cranking amps, so the right rating depends on the car; match or exceed the rating on the battery you are replacing.

Nearby sizes

GroupL × W × H (mm)Difference from 92
94R315 × 175 × 1900 mm length, 0 mm width, +15 mm height
41293 × 175 × 175-22 mm length, 0 mm width, 0 mm height
79307 × 179 × 188-8 mm length, +4 mm width, +13 mm height
40R278 × 175 × 175-37 mm length, 0 mm width, 0 mm height
91278 × 175 × 175-37 mm length, 0 mm width, 0 mm height

Positive numbers mean the other group is bigger than group 92. A bigger case only fits if your tray and hold-down have that much spare room; measure inside the hold-down frame, not the old battery.

Fitting a group 92

The group sets the case size, terminal position and hold-down. A battery from another group can only replace it when the length, width and height all fit the tray and the terminals land on the same sides. No other passenger-car group in the BCI chart has exactly the same case size and polarity. Use the tray fit checker to list every group that fits a measured space.

Source: Battery Council International, BCI Group Sizes (Oct 2023 PDF), page 7. Checked 2026-10-20.