Battery groups › 124R

BCI battery group

Group 124R battery size

A BCI group 124R battery is at most 262 mm long, 177 mm wide and 218 mm tall (10.31 × 6.97 × 8.58 in), according to the Battery Council International group chart.

Group 124R262 × 177 × 218 mm
Group 124R262 × 177 mmGroup 22F241 × 175 mmGroup 22HF241 × 175 mm
BCI group 124R maximum footprint (length × width) to scale, next to group 22F and group 22HF. Source: BCI group size chart.
Maximum size262 × 177 × 218 mm
In inches10.31 × 6.97 × 8.58
Terminal typesA
PolarityReversed (R): positive terminal on the opposite side from the base group
Cold cranking amps (OE range)500–740 A

Cars whose manuals point to group 124R

None of the owner's manuals this site has read so far print group 124R. Most Japanese and Korean makers print a case size or capacity instead of a BCI group, so the battery label on the car is the better guide.

Measuring for a group 124R

To take a group 124R, the tray needs at least 262 mm (10.31 in) of length and 177 mm (6.97 in) of width inside the hold-down, and 218 mm (8.58 in) of height below the hood or any bracket, with room left for the cable ends. These are BCI maximums: a real group 124R battery can be a few millimetres smaller, never larger. Original-equipment batteries in this group were rated from 500 to 740 cold cranking amps, so the right rating depends on the car; match or exceed the rating on the battery you are replacing.

Nearby sizes

GroupL × W × H (mm)Difference from 124R
124265 × 175 × 214+3 mm length, -2 mm width, -4 mm height
24260 × 173 × 225-2 mm length, -4 mm width, +7 mm height
74260 × 184 × 222-2 mm length, +7 mm width, +4 mm height
152R260 × 173 × 225-2 mm length, -4 mm width, +7 mm height
24R260 × 173 × 229-2 mm length, -4 mm width, +11 mm height

Positive numbers mean the other group is bigger than group 124R. A bigger case only fits if your tray and hold-down have that much spare room; measure inside the hold-down frame, not the old battery.

Fitting a group 124R

The group sets the case size, terminal position and hold-down. A battery from another group can only replace it when the length, width and height all fit the tray and the terminals land on the same sides. No other passenger-car group in the BCI chart has exactly the same case size and polarity. Use the tray fit checker to list every group that fits a measured space.

Source: Battery Council International, BCI Group Sizes (Oct 2023 PDF), page 7. Checked 2026-10-20.