Battery groups › 24

BCI battery group

Group 24 battery size

A BCI group 24 battery is at most 260 mm long, 173 mm wide and 225 mm tall (10.24 × 6.81 × 8.86 in), according to the Battery Council International group chart.

Group 24260 × 173 × 225 mm
Group 24260 × 173 mmGroup 22F241 × 175 mmGroup 22HF241 × 175 mm
BCI group 24 maximum footprint (length × width) to scale, next to group 22F and group 22HF. Source: BCI group size chart.
Maximum size260 × 173 × 225 mm
In inches10.24 × 6.81 × 8.86
Terminal typesA and A2
PolarityStandard layout for this group
Cold cranking amps (OE range)200–1000 A
JIS equivalents48D26R, 55D26R, 65D26R, 75D26R, 80D26R and 110D26R (BCI best fit)

Cars whose manuals point to group 24

None of the owner's manuals this site has read so far print group 24. Most Japanese and Korean makers print a case size or capacity instead of a BCI group, so the battery label on the car is the better guide.

Measuring for a group 24

To take a group 24, the tray needs at least 260 mm (10.24 in) of length and 173 mm (6.81 in) of width inside the hold-down, and 225 mm (8.86 in) of height below the hood or any bracket, with room left for the cable ends. These are BCI maximums: a real group 24 battery can be a few millimetres smaller, never larger. Original-equipment batteries in this group were rated from 200 to 1000 cold cranking amps, so the right rating depends on the car; match or exceed the rating on the battery you are replacing.

Nearby sizes

GroupL × W × H (mm)Difference from 24
152R260 × 173 × 2250 mm length, 0 mm width, 0 mm height
24R260 × 173 × 2290 mm length, 0 mm width, +4 mm height
24H260 × 173 × 2380 mm length, 0 mm width, +13 mm height
63258 × 162 × 225-2 mm length, -11 mm width, 0 mm height
124R262 × 177 × 218+2 mm length, +4 mm width, -7 mm height

Positive numbers mean the other group is bigger than group 24. A bigger case only fits if your tray and hold-down have that much spare room; measure inside the hold-down frame, not the old battery.

Fitting a group 24

The group sets the case size, terminal position and hold-down. A battery from another group can only replace it when the length, width and height all fit the tray and the terminals land on the same sides. No other passenger-car group in the BCI chart has exactly the same case size and polarity. Use the tray fit checker to list every group that fits a measured space.

Source: Battery Council International, BCI Group Sizes (Oct 2023 PDF), page 6. Checked 2026-10-20.