Battery groups › 49

BCI battery group

Group 49 battery size

A BCI group 49 battery is at most 353 mm long, 175 mm wide and 190 mm tall (13.9 × 6.89 × 7.48 in), according to the Battery Council International group chart.

Group 49353 × 175 × 190 mm
Group 49353 × 175 mmGroup 33338 × 173 mmGroup 43334 × 175 mm
BCI group 49 maximum footprint (length × width) to scale, next to group 33 and group 43. Source: BCI group size chart.
Maximum size353 × 175 × 190 mm
In inches13.9 × 6.89 × 7.48
Terminal typesA, A1 and A2
PolarityStandard layout for this group
Cold cranking amps (OE range)470–950 A
DIN / EN equivalentH8 / LN5 (BCI best fit)

Cars whose manuals point to group 49

Measuring for a group 49

To take a group 49, the tray needs at least 353 mm (13.9 in) of length and 175 mm (6.89 in) of width inside the hold-down, and 190 mm (7.48 in) of height below the hood or any bracket, with room left for the cable ends. These are BCI maximums: a real group 49 battery can be a few millimetres smaller, never larger. Original-equipment batteries in this group were rated from 470 to 950 cold cranking amps, so the right rating depends on the car; match or exceed the rating on the battery you are replacing.

Nearby sizes

GroupL × W × H (mm)Difference from 49
93353 × 175 × 1750 mm length, 0 mm width, -15 mm height
43334 × 175 × 205-19 mm length, 0 mm width, +15 mm height
94R315 × 175 × 190-38 mm length, 0 mm width, 0 mm height
95R394 × 175 × 190+41 mm length, 0 mm width, 0 mm height
76334 × 179 × 216-19 mm length, +4 mm width, +26 mm height

Positive numbers mean the other group is bigger than group 49. A bigger case only fits if your tray and hold-down have that much spare room; measure inside the hold-down frame, not the old battery.

Fitting a group 49

The group sets the case size, terminal position and hold-down. A battery from another group can only replace it when the length, width and height all fit the tray and the terminals land on the same sides. No other passenger-car group in the BCI chart has exactly the same case size and polarity. Use the tray fit checker to list every group that fits a measured space.

Source: Battery Council International, BCI Group Sizes (Oct 2023 PDF), page 6. Checked 2026-10-20.