Battery groups › 93

BCI battery group

Group 93 battery size

A BCI group 93 battery is at most 353 mm long, 175 mm wide and 175 mm tall (13.9 × 6.89 × 6.89 in), according to the Battery Council International group chart.

Group 93353 × 175 × 175 mm
Group 93353 × 175 mmGroup 33338 × 173 mmGroup 43334 × 175 mm
BCI group 93 maximum footprint (length × width) to scale, next to group 33 and group 43. Source: BCI group size chart.
Maximum size353 × 175 × 175 mm
In inches13.9 × 6.89 × 6.89
Terminal typesA1 and A2
PolarityStandard layout for this group
Cold cranking amps (OE range)600–800 A
DIN / EN equivalentT8 / LBN5 (BCI best fit)

Cars whose manuals point to group 93

None of the owner's manuals this site has read so far print group 93. Most Japanese and Korean makers print a case size or capacity instead of a BCI group, so the battery label on the car is the better guide.

Measuring for a group 93

To take a group 93, the tray needs at least 353 mm (13.9 in) of length and 175 mm (6.89 in) of width inside the hold-down, and 175 mm (6.89 in) of height below the hood or any bracket, with room left for the cable ends. These are BCI maximums: a real group 93 battery can be a few millimetres smaller, never larger. Original-equipment batteries in this group were rated from 600 to 800 cold cranking amps, so the right rating depends on the car; match or exceed the rating on the battery you are replacing.

Nearby sizes

GroupL × W × H (mm)Difference from 93
49353 × 175 × 1900 mm length, 0 mm width, +15 mm height
92315 × 175 × 175-38 mm length, 0 mm width, 0 mm height
43334 × 175 × 205-19 mm length, 0 mm width, +30 mm height
94R315 × 175 × 190-38 mm length, 0 mm width, +15 mm height
95R394 × 175 × 190+41 mm length, 0 mm width, +15 mm height

Positive numbers mean the other group is bigger than group 93. A bigger case only fits if your tray and hold-down have that much spare room; measure inside the hold-down frame, not the old battery.

Fitting a group 93

The group sets the case size, terminal position and hold-down. A battery from another group can only replace it when the length, width and height all fit the tray and the terminals land on the same sides. No other passenger-car group in the BCI chart has exactly the same case size and polarity. Use the tray fit checker to list every group that fits a measured space.

Source: Battery Council International, BCI Group Sizes (Oct 2023 PDF), page 7. Checked 2026-10-20.