Wiper sizes › 22 inch
Wiper blade size · 2 models
22-inch wiper blades: which cars use them
20 model years across 2 models (Chevrolet and GMC) print a wiper length in the owner's manual that is sold as a 22-inch blade. The printed length is 550 mm (21.65 in).
- 1Wiper blade 22" · 550 mm printed
Cars whose manual prints this length
| Model | Position | Printed | Model years |
|---|---|---|---|
| Chevrolet Silverado 1500 | Driver | 55 cm | 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024 |
| Chevrolet Silverado 1500 | Passenger | 55 cm | 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024 |
| GMC Sierra 1500 | Driver | 55 cm | 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024 |
| GMC Sierra 1500 | Passenger | 55 cm | 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024 |
By position, the 22-inch size is printed 20 times for the driver side and 20 times for the passenger side. The Chevrolet Silverado 1500 lists it most often (2015–2024, driver side).
What it pairs with
- Chevrolet Silverado 1500 (2015–2024): 22-inch driver blade with a 22-inch passenger blade.
- Chevrolet Silverado 1500 (2015–2024): 22-inch passenger blade with a 22-inch driver blade.
- GMC Sierra 1500 (2015–2024): 22-inch driver blade with a 22-inch passenger blade.
- GMC Sierra 1500 (2015–2024): 22-inch passenger blade with a 22-inch driver blade.
Buy front blades as a set of two lengths, not two of the same, unless the manual prints the same length for both sides (as the Chevrolet Silverado 1500 does) (as the Chevrolet Silverado 1500 does) (as the GMC Sierra 1500 does) (as the GMC Sierra 1500 does). A blade one size longer than printed can strike the windshield pillar or overlap the other blade at the top of its sweep.
Which printed lengths count as 22 inches
Blade makers step their sizes in 25 mm increments and label each step as one inch, so a printed length of about 538 to 562 mm is sold as a 22-inch blade. A true 22 inches is 559 mm, slightly longer than the trade size. Manuals print the length in millimetres or centimetres; this page converts each one and rounds to the trade step, the same way the mm-to-inches guide explains.
Before you buy
The manual prints a length, not the arm connector type. Blade boxes list the arm connectors their adapters fit; compare that list with the connector on the old blade before fitting. Rear blades often use a model-specific mount, so match the old rear blade as well as its length. If your trim or model year is not in the table, its manual either prints a different length or prints none, so open your car's page from all cars.
Other sizes with their own page: 12 in · 20 in · 24 in · 26 in. One size down is 20 inches; one size up is 24 inches (among sizes with a page).